Rogers High-Frequency PCB Materials — Full Portfolio, In-Stock & Custom PCB Fabrication at Minkinzi PCB Factory

High-Frequency PCB Materials: The Complete Rogers Portfolio — In Stock, Custom PCB Fabrication Available

When your design demands low signal loss, stable dielectric constant (Dk), and consistent performance across microwave, millimeter-wave, and ultra-high-speed digital applications, Rogers high-frequency laminates are the industry benchmark. At Minkinzi PCB, we master the lamination and processing of the entire Rogers material family — and maintain a standing inventory of the most popular grades so your prototyping and mass-production timelines are never delayed by material lead times.

Industries & Applications We Serve

Our Rogers PCB solutions power mission-critical electronics across the following markets:

• Antenna systems & wireless backhaul

• Communication systems & IP infrastructure

• High-speed computing & data centers

• Electrical insulation, conduction & EMI shielding

• Power amplifiers & small cells / Distributed Antenna Systems (DAS)

• Test and measurement equipment

• Thermal management solutions for high-power RF

Rogers Product Series Available at Minkinzi PCB

We fabricate and stock the full Rogers high-frequency material portfolio, organized into five core series:

XtremeSpeed RO1200™ Series — Ultra-High-Speed Digital

Laminates and bondplys designed specifically for ultra-high-speed digital applications where signal integrity at 112 Gbps and beyond is non-negotiable.

TMM® Thermoset Microwave Laminates & 3D Molded Dielectric Materials

Combines the electrical performance of ceramic-loaded PTFE with the mechanical robustness of thermoset resins — ideal for complex 3D molded RF structures.

TC350™ Series — Thermally Conductive Microwave Laminates

RT/duroid® Series — PTFE Composites for Precision Microwave

RO4000® Series — Hydrocarbon Ceramic Laminates

Rogers RO4000 series are woven glass reinforced, ceramic-filled hydrocarbon laminates that combine the electrical performance of PTFE with the manufacturability of FR-4. Designed for high-volume applications where cost-efficiency and high-frequency performance must coexist.

Series-Wide Key Properties

• Dk range: 2.55 – 6.15 (depending on variant)

• Dissipation factor (Df): as low as 0.0021 @ 10 GHz

• Lead-free process compatible — high Tg (>280°C), no special via preparation

• Excellent dimensional stability from woven glass reinforcement

• Compatible with standard FR-4 fabrication processes — lowers total cost of ownership

Detailed Product Breakdown:

RO4003C™ Laminate

• Cost-sensitive microwave/RF design material

• Dk 3.38 (±0.05)

• Lowest loss in the RO4000 family: Df 0.0027 @ 10 GHz

RO4350B™ Laminate ⭐ Market Leader

• Industry-leading material for base station power amplifier designs

• UL 94 V-0 flame retardant rating

• Dk 3.48 (±0.05), Df 0.0037 @ 10 GHz

RO4360G2™ Laminate

• RoHS compliant with low Z-axis CTE

• Dk 6.15 (±0.015), Df 0.0038 @ 10 GHz

RO4400™ / RO4400T™ Bondplys

• Prepregs based on the RO4000 series

• Supports multiple sequential laminations

• Lead-free soldering compatible

• Enables thinner dielectric layers for flexible multilayer designs

RO4500™ Laminate

• Commercial-grade, high-volume antenna-grade material

• Excellent mechanical performance for efficient installation

• Compatible with LoPro™ copper foil for improved PIM

RO4700™ Antenna-Grade Laminate

• Industry's first RO4000 low-Dk antenna-grade material

• Dk values: 2.55 (±0.05) and 3.0 (±0.05)

• Df: 0.0022 @ 2.5 GHz and 0.0037 @ 2.5 GHz

RO4000® LoPro® Laminate

• Standard RO4000 paired with reverse-treated copper foil

• Low Dk, low loss for high-frequency circuits

• Improved passive intermodulation (PIM) performance

RO4830™ Plus Laminate

• Innovative thermoset resin system

• Ultra-low-profile electrodeposited copper foil

• PFAS-free

RO4835™ Laminate

• 10× oxidation resistance vs. conventional thermoset materials

• Dk 3.48 (±0.05), Df 0.0037 @ 10 GHz

RO4835IND™ LoPro® Laminate

• Optimized for 60–81 GHz industrial radar

• Low insertion loss with LoPro® reverse-treated copper foil

RO4835T™ Laminate

• Thinner version of RO4835™

• Open-weave fiberglass for reduced Dk variation

CU4000™ & CU4000 LoPro® Copper Foils

• IPC-4562A Grade 3 copper foil with high ductility

• Enhanced multilayer PCB performance with the RO4000 series

• Simplified multilayer layer alignment

Typical Applications — RO4000 Series

• Cellular base station antennas and power amplifiers

• RF identification (RFID) tags and readers

• Automotive telematics and V2X communication modules

• Point-to-point microwave digital radio links

• LNB (Low-Noise Block) converters for satellite TV

• Microwave filters, couplers, and combiners

RO3000® Series — Ceramic-Filled PTFE Laminates

For designs operating in higher-frequency microwave and millimeter-wave bands (24 GHz, 77 GHz, and beyond), the RO3000 series offers tight Dk tolerance, low loss, and excellent mechanical stability across wide temperature ranges.

Series-Wide Key Properties

• Dk range: 3.0 – 10.2 (engineered through ceramic filler loading)

• Dissipation factor (Df): 0.0010 – 0.0025 @ 10 GHz

• Stable Dk over frequency and temperature — critical for mmWave and phased-array designs

• Low Z-axis CTE for reliable plated-through-hole (PTH) reliability

• Available with ED copper, rolled copper, or reverse-treated foil

Detailed Product Breakdown:

Typical Applications — RO3000 Series

• 77 GHz / 79 GHz automotive radar (ADAS, autonomous driving)

• 5G mmWave base stations and customer premise equipment

• Satellite communication and phased-array antennas

• Aerospace and defense RF/microwave systems

• High-frequency test fixtures

• 60–81 GHz industrial radar

Why Choose Minkinzi PCB for Rogers High-Frequency Fabrication?

Whether you need a simple 2-layer RO4350B patch antenna, a thermally-managed TC350 power amplifier board, a 77 GHz RO3003G2 automotive radar PCB, or a complex 8-layer RO3003 + FR-4 hybrid backplane, our engineering team will review your stack-up, advise on material selection, and quote your project within 24 hours.

Similar & Alternative High-Frequency Materials (Datasheets Available)

We also work with the following equivalent or substitute materials — ideal for cost optimization or supply-chain diversification:

Datasheet Downloads

To request official manufacturer datasheets for any grade mentioned above — including RO4350B, RO4003C, RO3003, RO3006, RO3010, TC350, RT/duroid 5880, RO3003G2, TLY-5, RF-35, AD255, and more — please contact our sales engineers. We will provide:

• Manufacturer-authorized PDF datasheets

• Stack-up design support for your specific application

• Fast quotation with our standing-stock materials

• Free DFM review within 24 hours

[Contact Minkinzi PCB Now] — Get a free DFM review and 24-hour quote for your Rogers high-frequency PCB project, spanning the entire portfolio from RO4000 to RO3000, RT/duroid, TC350, and beyond.